U-Boot 2015.07 (Apr 13 2016 - 22:04:52 -0400) DRAM: ECC disabled 1 GiB MMC: zynq_sdhci: 0 SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Gem.e000b000 U-BOOT for pz_petalinux_1 Gem.e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Gem.e000b000: No link. Hit any key to stop autoboot: 4  3  2  1  0 Device: zynq_sdhci Manufacturer ID: 3 OEM: 5344 Name: SU04G Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 3.7 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes reading image.ub 8814212 bytes read in 1482 ms (5.7 MiB/s) ## Loading kernel from FIT Image at 01000000 ... Using 'conf@1' configuration Verifying Hash Integrity ... OK Trying 'kernel@1' kernel subimage Description: PetaLinux Kernel Type: Kernel Image Compression: gzip compressed Data Start: 0x010000f0 Data Size: 8798675 Bytes = 8.4 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: crc32 Hash value: 541ec36a Verifying Hash Integrity ... crc32+ OK ## Loading fdt from FIT Image at 01000000 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x018643a8 Data Size: 14238 Bytes = 13.9 KiB Architecture: ARM Hash algo: crc32 Hash value: 45e95675 Verifying Hash Integrity ... crc32+ OK Booting using the fdt blob at 0x18643a8 Uncompressing Kernel Image ... OK Loading Device Tree to 07ff9000, end 07fff79d ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.0.0-xilinx (jeffrey@johnson-linux) (gcc version 4.9.2 (Sourcery CodeBench Lite 2015.05-17) ) #2 SMP PREEMPT Wed Apr 13 22:06:08 EDT 2016 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: pz_petalinux_1 bootconsole [earlycon0] enabled cma: Reserved 16 MiB at 0x3f000000 Memory policy: Data cache writealloc PERCPU: Embedded 11 pages/cpu @eefd4000 s12672 r8192 d24192 u45056 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 Kernel command line: console=ttyPS0,115200 earlyprintk PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1010680K/1048576K available (4787K kernel code, 223K rwdata, 1712K rodata, 5384K init, 208K bss, 21512K reserved, 16384K cma-reserved, 253952K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc06611e8 (6501 kB) .init : 0xc0662000 - 0xc0ba4000 (5384 kB) .data : 0xc0ba4000 - 0xc0bdbee0 ( 224 kB) .bss : 0xc0bdbee0 - 0xc0c10234 ( 209 kB) Preemptible hierarchical RCU implementation. Additional per-CPU info printed with stalls. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 slcr mapped to f0006000 zynq_clock_init: clkc starts at f0006100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns timer #0 at f000a000, irq=17 Console: colour dummy device 80x30 Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x488d10 - 0x488d68 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (2664.03 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. bounce: pool size: 64 pages io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) zynq-pinctrl 700.pinctrl: zynq pinctrl initialized xilinx-pcie 50000000.axi-pcie: PCIe Link is UP PCI host bridge /amba_pl/axi-pcie@40000000 ranges: No bus range found for /amba_pl/axi-pcie@40000000, using [bus 00-ff] MEM 0x40000000..0x4fffffff -> 0x40000000 xilinx-pcie 50000000.axi-pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers disabled pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000] pci 0000:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff] pci 0000:00:00.0: BAR 7: no space for [io size 0x1000] pci 0000:00:00.0: BAR 7: failed to assign [io size 0x1000] pci 0000:01:00.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref] pci 0000:01:00.0: BAR 0: assigned [mem 0x40010000-0x40013fff 64bit] pci 0000:01:00.0: BAR 2: no space for [io size 0x0100] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0100] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x40000000-0x400fffff] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 xilinx-cdma 7e200000.dma: Xilinx AXI CDMA Engine driver Probed!! e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 143, base_baud = 3125000) is a xuartps àconsole [ttyPS0] enabled console [ttyPS0] enabled bootconsole [earlycon0] disabled bootconsole [earlycon0] disabled xdevcfg f8007000.devcfg: ioremap 0xf8007000 to f006c000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded pci 0000:00:00.0: enabling device (0140 -> 0142) nvme 0000:01:00.0: enabling device (0140 -> 0142) CAN device driver interface libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 145 (00:0a:35:00:1e:53) macb e000b000.ethernet eth0: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started Driver 'mmcblk' needs updating - please use bus_type methods sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-arasan e0100000.sdhci: No vmmc regulator found sdhci-arasan e0100000.sdhci: No vqmmc regulator found irq 0, desc: ee803040, depth: 1, count: 0, unhandled: 0 ->handle_irq(): c0050300, handle_bad_irq+0x0/0x220 ->irq_data.chip(): c0bada40, 0xc0bada40 ->action(): (null) IRQ_NOPROBE set IRQ_NOREQUEST set unexpected IRQ trap at vector 00 mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA sdhci-arasan e0101000.sdhci: No vmmc regulator found sdhci-arasan e0101000.sdhci: No vqmmc regulator found mmc1: SDHCI controller on e0101000.sdhci [e0101000.sdhci] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Registering SWP/SWPB emulation handler /opt/PetaLinux/petalinux-v2015.4-final/components/linux-kernel/xlnx-4.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ALSA device list: No soundcards found. mmc0: new high speed SDHC card at address aaaa mmcblk0: mmc0:aaaa SU04G 3.69 GiB Freeing unused kernel memory: 5384K (c0662000 - c0ba4000) INIT: mmcblk0: p1 p2 version 2.88 booting mmc1: MAN_BKOPS_EN bit is not set mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC04G 3.52 GiB mmcblk1boot0: mmc1:0001 MMC04G partition 1 16.0 MiB mmcblk1boot1: mmc1:0001 MMC04G partition 2 16.0 MiB mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. mmcblk1rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk1rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk1rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk1rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk1rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk1rpmb: timed out sending r/w cmd command, card status 0x400900 mmc1: tried to reset card EXT4-fs (mmcblk0p2): recovery complete EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) blk_update_request: I/O error, dev mmcblk1rpmb, sector 0 FAT-fs (mmcblk1rpmb): unable to read boot sector Creating /dev/flash/* device nodes random: dd urandom read with 12 bits of entropy available Starting internet superserver: inetd. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-pINIT: Entering runlevel: 5 Configuring network interfaces... udhcpc (v1.23.1) started Sending discover... irq 0, desc: ee803040, depth: 1, count: 0, unhandled: 0 ->handle_irq(): c0050300, handle_bad_irq+0x0/0x220 ->irq_data.chip(): c0bada40, 0xc0bada40 ->action(): (null) IRQ_NOPROBE set IRQ_NOREQUEST set unexpected IRQ trap at vector 00 nvme0n1: p1 Sending discover... Sending discover... No lease, forking to background done. Built with PetaLinux v2015.4 (Yocto 1.8) pz_petalinux_1 /dev/ttyPS0 pz_petalinux_1 login: