U-Boot 2015.07 (Apr 27 2016 - 14:50:00 -0400) DRAM: ECC disabled 512 MiB MMC: zynq_sdhci: 0 SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Gem.e000b000 U-BOOT for zb_petalinux Gem.e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Gem.e000b000: No link. Hit any key to stop autoboot: 4  3  2  1  0 Device: zynq_sdhci Manufacturer ID: 27 OEM: 5048 Name: SD04G Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 3.7 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes reading image.ub 6388844 bytes read in 560 ms (10.9 MiB/s) ## Loading kernel from FIT Image at 01000000 ... Using 'conf@1' configuration Verifying Hash Integrity ... OK Trying 'kernel@1' kernel subimage Description: PetaLinux Kernel Type: Kernel Image Compression: gzip compressed Data Start: 0x010000f0 Data Size: 6370294 Bytes = 6.1 MiB Architecture: ARM OS: Linux Load Address: 0x00008000 Entry Point: 0x00008000 Hash algo: crc32 Hash value: f1d283f4 Verifying Hash Integrity ... crc32+ OK ## Loading fdt from FIT Image at 01000000 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x016135cc Data Size: 17249 Bytes = 16.8 KiB Architecture: ARM Hash algo: crc32 Hash value: 6e0deff8 Verifying Hash Integrity ... crc32+ OK Booting using the fdt blob at 0x16135cc Uncompressing Kernel Image ... OK Loading Device Tree to 07ff8000, end 07fff360 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.0.0-xilinx (jeffrey@johnson-linux) (gcc version 4.9.2 (Sourcery CodeBench Lite 2015.05-17) ) #3 SMP PREEMPT Wed Apr 27 14:50:30 EDT 2016 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: zb_petalinux bootconsole [earlycon0] enabled cma: Reserved 16 MiB at 0x1f000000 Memory policy: Data cache writealloc PERCPU: Embedded 11 pages/cpu @debcc000 s12672 r8192 d24192 u45056 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttyPS0,115200 earlyprintk PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 493252K/524288K available (4754K kernel code, 223K rwdata, 1708K rodata, 3016K init, 208K bss, 14652K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0657e50 (6464 kB) .init : 0xc0658000 - 0xc094a000 (3016 kB) .data : 0xc094a000 - 0xc0981da0 ( 224 kB) .bss : 0xc0981da0 - 0xc09b60b4 ( 209 kB) Preemptible hierarchical RCU implementation. Additional per-CPU info printed with stalls. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 slcr mapped to e0804000 zynq_clock_init: clkc starts at e0804100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns timer #0 at e0808000, irq=17 Console: colour dummy device 80x30 Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x4801b0 - 0x480208 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (2664.03 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) zynq-pinctrl 700.pinctrl: zynq pinctrl initialized dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 143, base_baud = 3125000) is a xuartps Àconsole [ttyPS0] enabled console [ttyPS0] enabled bootconsole [earlycon0] disabled bootconsole [earlycon0] disabled xdevcfg f8007000.devcfg: ioremap 0xf8007000 to e086a000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 145 (00:0a:35:00:1e:53) macb e000b000.ethernet eth0: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. xilinx_axienet 41000000.ethernet: TX_CSUM 0 xilinx_axienet 41000000.ethernet: RX_CSUM 0 libphy: Xilinx Axi Ethernet MDIO: probed xilinx_axienet 41040000.ethernet: TX_CSUM 0 xilinx_axienet 41040000.ethernet: RX_CSUM 0 libphy: Xilinx Axi Ethernet MDIO: probed xilinx_axienet 41080000.ethernet: TX_CSUM 0 xilinx_axienet 41080000.ethernet: RX_CSUM 0 libphy: Xilinx Axi Ethernet MDIO: probed xilinx_axienet 410c0000.ethernet: TX_CSUM 0 xilinx_axienet 410c0000.ethernet: RX_CSUM 0 libphy: Xilinx Axi Ethernet MDIO: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started Driver 'mmcblk' needs updating - please use bus_type methods sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-arasan e0100000.sdhci: No vmmc regulator found sdhci-arasan e0100000.sdhci: No vqmmc regulator found mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Registering SWP/SWPB emulation handler /opt/PetaLinux/petalinux-v2015.4-final/components/linux-kernel/xlnx-4.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ALSA device list: No soundcards found. Freeing unused kernel memory: 3016K (c0658000 - c094a000) mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.70 GiB mmcblk0: p1 INIT: version 2.88 booting Creating /dev/flash/* device nodes random: dd urandom read with 1 bits of entropy available Starting internet superserver: inetd. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-po INIT: Entering runlevel: 5 Configuring network interfaces... udhcpc (v1.23.1) started Sending discover... Sending discover... Sending discover... No lease, forking to background done. Built with PetaLinux v2015.4 (Yocto 1.8) zb_petalinux /dev/ttyPS0 zb_petalinux login: