[0.016]**************************************** [0.070]Xilinx Versal Platform Loader and Manager [0.125]Release 2022.1 Apr 11 2022 - 09:29:50 [0.183]Platform Version: v2.0 PMC: v2.0, PS: v2.0 [0.247]BOOTMODE: 0xE, MULTIBOOT: 0xF0000000 [0.303]**************************************** [0.520]Non Secure Boot [3.399]PLM Initialization Time [3.447]***********Boot PDI Load: Started*********** [3.506]Loading PDI from SD1_LS [3.554]Monolithic/Master Device [335.242]331.709 ms: PDI initialization time [335.302]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [335.369]---Loading Partition#: 0x1, Id: 0xC [387.769] 52.314 ms for Partition#: 0x1, Size: 2960 Bytes [392.718]---Loading Partition#: 0x2, Id: 0x0 [397.192] 0.523 ms for Partition#: 0x2, Size: 48 Bytes [401.426]---Loading Partition#: 0x3, Id: 0x0 [416.809] 11.430 ms for Partition#: 0x3, Size: 58912 Bytes [419.133]---Loading Partition#: 0x4, Id: 0x0 [425.258] 2.172 ms for Partition#: 0x4, Size: 5888 Bytes PSM Firmware version: 2022.1 [Build: Apr 11 2022 09:29:50 ] [433.324]+++Loading Image#: 0x2, Name: pl_cfi, Id: 0x18700000 [438.678]---Loading Partition#: 0x5, Id: 0x3 [1271.284] 828.655 ms for Partition#: 0x5, Size: 4256016 Bytes [1273.952]---Loading Partition#: 0x6, Id: 0x5 [1446.730] 168.741 ms for Partition#: 0x6, Size: 721456 Bytes [1449.340]+++Loading Image#: 0x3, Name: fpd, Id: 0x0420C003 [1454.518]---Loading Partition#: 0x7, Id: 0x8 [1460.467] 1.913 ms for Partition#: 0x7, Size: 1616 Bytes [1463.856]+++Loading Image#: 0x4, Name: apu_subsystem, Id: 0x1C000000 [1469.624]---Loading Partition#: 0x8, Id: 0x0 [1479.171] 5.510 ms for Partition#: 0x8, Size: 25360 Bytes [1481.498]---Loading Partition#: 0x9, Id: 0x0 [1497.634] 12.099 ms for Partition#: 0x9, Size: 63440 Bytes [1500.046]---Loading Partition#: 0xA, Id: 0x0 [1690.213] 186.130 ms for Partition#: 0xA, Size: 1055072 Bytes N[T6CE. 4TF**u**in* oB XtliDx Vors:l oil*co* IN*O: 1BL71:1fs2l-atf hmn: ReM sime .2O1]Co: lBP31 Secure c at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v2.6(debug):v1.1-9207-g67ca59c67 NOTICE: BL31: Built : 03:46:40, Mar 24 2022 INFO: GICv3 with legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: Maximum SPI INTID supported: 191 INFO: BL31: Initializing runtime services WARNING: BL31: cortex_a72: CPU workaround for 859971 was missing! WARNING: BL31: cortex_a72: CPU workaround for 1319367 was missing! INFO: BL31: cortex_a72: CPU workaround for cve_2017_5715 was applied INFO: BL31: cortex_a72: CPU workaround for cve_2018_3639 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x8000000 INFO: SPSR = 0x3c9 U-Boot 2022.01 (Apr 04 2022 - 07:53:54 +0000) CPU: Versal Silicon: v2 Model: Xilinx Versal vck190 Eval board revA DRAM: 2 GiB EL Level: EL2 MMC: mmc@f1050000: 0 Loading Environment from FAT... *** Error - No Valid Environment Area found *** Warning - bad env area, using default environment In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Bootmode: LVL_SHFT_SD_MODE1 Net: ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id zynq_gem ethernet@ff0c0000: Failed to read eth PHY id, err: -2 Warning: ethernet@ff0c0000 (eth0) using random MAC address - 6e:e5:7f:ad:df:b4 eth0: ethernet@ff0c0000 ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id zynq_gem ethernet@ff0d0000: Failed to read eth PHY id, err: -2 Warning: ethernet@ff0d0000 (eth1) using random MAC address - 36:e7:d2:01:3e:7c , eth1: ethernet@ff0d0000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 2777 bytes read in 14 ms (193.4 KiB/s) ## Executing script at 20000000 Trying to load boot images from mmc0 9691136 bytes read in 1224 ms (7.6 MiB/s) ## Loading kernel from FIT Image at 10000000 ... Using 'conf-system-default.dtb' configuration Trying 'kernel-1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: gzip compressed Data Start: 0x100000fc Data Size: 9606798 Bytes = 9.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x00200000 Entry Point: 0x00200000 Hash algo: sha256 Hash value: 9e3d99b650c76a6fa35cd0e2c66f6a499c822a95ab77ce220d896435cb1850e3 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 10000000 ... Using 'conf-system-default.dtb' configuration Trying 'fdt-system-default.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x109298a0 Data Size: 25352 Bytes = 24.8 KiB Architecture: AArch64 Hash algo: sha256 Hash value: 90deb416c787c4e926f3cd75351de2dc27821bf0ec05e7ce07c8a8824c728220 Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x109298a0 Uncompressing Kernel Image Loading Device Tree to 000000007dec0000, end 000000007dec9307 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.15.19-xilinx-v2022.1 (oe-user@oe-host) (aarch64-xilinx-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP Mon Apr 11 17:52:14 UTC 2022 [ 0.000000] Machine model: Xilinx Versal vck190 Eval board revA [ 0.000000] earlycon: pl11 at MMIO32 0x00000000ff000000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] cma: Reserved 256 MiB at 0x000000006bc00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s34776 r8192 d30760 u73728 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: console=ttyAMA0 earlycon=pl011,mmio32,0xFF000000,115200n8 clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait rootfs=ext4 uio_pdrv_genirq.of_id=generic-uio [ 0.000000] Unknown kernel command line parameters "rootfs=ext4", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1772500K/2097152K available (14464K kernel code, 1006K rwdata, 3964K rodata, 2112K init, 572K bss, 62508K reserved, 262144K cma-reserved) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f9080000 [ 0.000000] ITS [mem 0xf9020000-0xf903ffff] [ 0.000000] ITS@0x00000000f9020000: allocated 65536 Devices @1880000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000001830000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000001840000 [ 0.000000] ITS queue timeout (64 0) [ 0.000000] ITS cmd its_build_mapc_cmd failed [ 0.000000] ITS queue timeout (128 0) [ 0.000000] ITS cmd its_build_invall_cmd failed [ 0.000000] random: get_random_bytes called from start_kernel+0x474/0x6d4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns [ 0.000000] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns [ 0.008358] Console: colour dummy device 80x25 [ 0.012845] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000) [ 0.023358] pid_max: default: 32768 minimum: 301 [ 0.028125] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.035583] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.044104] rcu: Hierarchical SRCU implementation. [ 0.049031] Platform MSI: gic-its@f9020000 domain created [ 0.054516] PCI/MSI: /axi/interrupt-controller@f9000000/gic-its@f9020000 domain created [ 0.062620] EFI services will not be available. [ 0.067249] smp: Bringing up secondary CPUs ... [ 0.072092] Detected PIPT I-cache on CPU1 [ 0.072111] GICv3: CPU1: found redistributor 1 region 0:0x00000000f90a0000 [ 0.072119] GICv3: CPU1: using allocated LPI pending table @0x0000000001850000 [ 1.240132] ITS queue timeout (192 0) [ 1.240135] ITS cmd its_build_mapc_cmd failed [ 2.408164] ITS queue timeout (256 0) [ 2.408166] ITS cmd its_build_invall_cmd failed [ 2.408183] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 2.408227] smp: Brought up 1 node, 2 CPUs [ 2.453413] SMP: Total of 2 processors activated. [ 2.458145] CPU features: detected: 32-bit EL0 Support [ 2.463312] CPU features: detected: CRC32 instructions [ 2.468517] CPU: All CPU(s) started at EL2 [ 2.472645] alternatives: patching kernel code [ 2.477653] devtmpfs: initialized [ 2.483236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 2.493065] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 2.502503] pinctrl core: initialized pinctrl subsystem [ 2.508054] DMI not present or invalid. [ 2.512055] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.518615] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 2.525768] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 2.533778] audit: initializing netlink subsys (disabled) [ 2.539269] audit: type=2000 audit(2.460:1): state=initialized audit_enabled=0 res=1 [ 2.539516] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 2.553915] ASID allocator initialised with 65536 entries [ 2.559418] Serial: AMBA PL011 UART driver [ 2.573011] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 2.579765] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 2.586515] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.593268] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 3.115924] cryptd: max_cpu_qlen set to 1000 [ 3.133984] DRBG: Continuing without Jitter RNG [ 3.220299] raid6: neonx8 gen() 3951 MB/s [ 3.292634] raid6: neonx8 xor() 2954 MB/s [ 3.364967] raid6: neonx4 gen() 4079 MB/s [ 3.437296] raid6: neonx4 xor() 3069 MB/s [ 3.509632] raid6: neonx2 gen() 3599 MB/s [ 3.581964] raid6: neonx2 xor() 2824 MB/s [ 3.654302] raid6: neonx1 gen() 2782 MB/s [ 3.726634] raid6: neonx1 xor() 2278 MB/s [ 3.798969] raid6: int64x8 gen() 2126 MB/s [ 3.871302] raid6: int64x8 xor() 1295 MB/s [ 3.943633] raid6: int64x4 gen() 2379 MB/s [ 4.015967] raid6: int64x4 xor() 1358 MB/s [ 4.088303] raid6: int64x2 gen() 2235 MB/s [ 4.160637] raid6: int64x2 xor() 1205 MB/s [ 4.232986] raid6: int64x1 gen() 1706 MB/s [ 4.305318] raid6: int64x1 xor() 897 MB/s [ 4.309610] raid6: using algorithm neonx4 gen() 4079 MB/s [ 4.315043] raid6: .... xor() 3069 MB/s, rmw enabled [ 4.320036] raid6: using neon recovery algorithm [ 4.324952] iommu: Default domain type: Translated [ 4.329863] iommu: DMA domain TLB invalidation policy: strict mode [ 4.336314] SCSI subsystem initialized [ 4.340182] usbcore: registered new interface driver usbfs [ 4.345714] usbcore: registered new interface driver hub [ 4.351073] usbcore: registered new device driver usb [ 4.356193] mc: Linux media interface: v0.10 [ 4.360499] videodev: Linux video capture interface: v2.00 [ 4.366041] pps_core: LinuxPPS API ver. 1 registered [ 4.371040] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.380239] PTP clock support registered [ 4.384195] EDAC MC: Ver: 3.0.0 [ 4.387573] zynqmp-ipi-mbox mailbox@ff3f0440: Registered ZynqMP IPI mbox with TX/RX channels. [ 4.396262] FPGA manager framework [ 4.399752] Advanced Linux Sound Architecture Driver Initialized. [ 4.406082] Bluetooth: Core ver 2.22 [ 4.409682] NET: Registered PF_BLUETOOTH protocol family [ 4.415026] Bluetooth: HCI device and connection manager initialized [ 4.421421] Bluetooth: HCI socket layer initialized [ 4.426328] Bluetooth: L2CAP socket layer initialized [ 4.431409] Bluetooth: SCO socket layer initialized [ 4.436539] clocksource: Switched to clocksource arch_sys_counter [ 4.442765] VFS: Disk quotas dquot_6.6.0 [ 4.446738] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.456441] NET: Registered PF_INET protocol family [ 4.461457] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 4.469599] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 4.478199] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 4.486240] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 4.493743] TCP: Hash tables configured (established 16384 bind 16384) [ 4.500355] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 4.507134] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 4.514387] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.520347] RPC: Registered named UNIX socket transport module. [ 4.526318] RPC: Registered udp transport module. [ 4.531052] RPC: Registered tcp transport module. [ 4.535784] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.542543] PCI: CLS 0 bytes, default 64 [ 4.546706] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 4.565268] Initialise system trusted keyrings [ 4.569808] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 4.576735] NFS: Registering the id_resolver key type [ 4.581871] Key type id_resolver registered [ 4.586081] Key type id_legacy registered [ 4.590131] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.596875] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.604323] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 4.639471] NET: Registered PF_ALG protocol family [ 4.644298] xor: measuring software checksum speed [ 4.650802] 8regs : 5864 MB/sec [ 4.656640] 32regs : 6761 MB/sec [ 4.662667] arm64_neon : 5972 MB/sec [ 4.667047] xor: using function: 32regs (6761 MB/sec) [ 4.672129] Key type asymmetric registered [ 4.676247] Asymmetric key parser 'x509' registered [ 4.681181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 4.688630] io scheduler mq-deadline registered [ 4.693188] io scheduler kyber registered [ 4.697756] xilinx-xdma-pcie 80000000.qdma: host bridge /amba_pl@0/qdma@400000000 ranges: [ 4.705999] xilinx-xdma-pcie 80000000.qdma: No bus range found for /amba_pl@0/qdma@400000000, using [bus 00-ff] [ 4.716345] xilinx-xdma-pcie 80000000.qdma: MEM 0x00a8000000..0x00afffffff -> 0x00a8000000 [ 4.725192] xilinx-xdma-pcie 80000000.qdma: PCIe Link is UP [ 4.730894] xilinx-xdma-pcie 80000000.qdma: PCI host bridge to bus 0000:00 [ 4.737818] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.743338] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xafffffff] [ 4.750285] pci 0000:00:00.0: [10ee:b0b4] type 01 class 0x060400 [ 4.756339] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref] [ 4.763652] pci 0000:00:00.0: PME# supported from D3cold [ 4.769530] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.777655] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802 [ 4.783723] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.791204] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.797872] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref] [ 4.805587] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref] [ 4.813650] pci 0000:00:00.0: BAR 8: assigned [mem 0xa8000000-0xa80fffff] [ 4.820484] pci 0000:01:00.0: BAR 0: assigned [mem 0xa8000000-0xa8003fff 64bit] [ 4.827846] pci 0000:00:00.0: PCI bridge to [bus 01] [ 4.832842] pci 0000:00:00.0: bridge window [mem 0xa8000000-0xa80fffff] [ 4.839729] xilinx-xdma-pcie 90000000.qdma: host bridge /amba_pl@0/qdma@440000000 ranges: [ 4.847969] xilinx-xdma-pcie 90000000.qdma: No bus range found for /amba_pl@0/qdma@440000000, using [bus 00-ff] [ 4.858310] xilinx-xdma-pcie 90000000.qdma: MEM 0x00b0000000..0x00bfffffff -> 0x00b0000000 [ 4.867132] xilinx-xdma-pcie 90000000.qdma: PCIe Link is UP [ 4.872823] xilinx-xdma-pcie 90000000.qdma: PCI host bridge to bus 0001:00 [ 4.879745] pci_bus 0001:00: root bus resource [bus 00-ff] [ 4.885266] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xbfffffff] [ 4.892200] pci 0001:00:00.0: [10ee:b0b4] type 01 class 0x060400 [ 4.898257] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref] [ 4.905565] pci 0001:00:00.0: PME# supported from D3cold [ 4.911417] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.919538] pci 0001:01:00.0: [144d:a80a] type 00 class 0x010802 [ 4.925602] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.933080] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.939743] pci 0001:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref] [ 4.947453] pci 0001:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref] [ 4.955516] pci 0001:00:00.0: BAR 8: assigned [mem 0xb0000000-0xb00fffff] [ 4.962353] pci 0001:01:00.0: BAR 0: assigned [mem 0xb0000000-0xb0003fff 64bit] [ 4.969718] pci 0001:00:00.0: PCI bridge to [bus 01] [ 4.974712] pci 0001:00:00.0: bridge window [mem 0xb0000000-0xb00fffff] [ 4.998382] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.005388] Serial: AMBA driver [ 5.008963] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 5.017878] brd: module loaded [ 5.022997] loop: module loaded [ 5.026899] nvme nvme0: pci function 0000:01:00.0 [ 5.031652] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 5.037368] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 5.037398] nvme nvme1: pci function 0001:01:00.0 [ 5.047989] pci 0001:00:00.0: enabling device (0000 -> 0002) [ 5.048233] mtdoops: mtd device (mtddev=name/number) must be supplied [ 5.053706] nvme 0001:01:00.0: enabling device (0000 -> 0002) [ 5.061819] tun: Universal TUN/TAP device driver, 1.6 [ 5.066021] nvme nvme0: Shutdown timeout set to 10 seconds [ 5.071164] CAN device driver interface [ 5.080704] nvme nvme1: Shutdown timeout set to 10 seconds [ 5.080714] SPI driver wl1271_spi has no spi_device_id for ti,wl1271 [ 5.092628] SPI driver wl1271_spi has no spi_device_id for ti,wl1273 [ 5.099026] SPI driver wl1271_spi has no spi_device_id for ti,wl1281 [ 5.105419] SPI driver wl1271_spi has no spi_device_id for ti,wl1283 [ 5.111817] SPI driver wl1271_spi has no spi_device_id for ti,wl1285 [ 5.118211] SPI driver wl1271_spi has no spi_device_id for ti,wl1801 [ 5.124607] SPI driver wl1271_spi has no spi_device_id for ti,wl1805 [ 5.131000] SPI driver wl1271_spi has no spi_device_id for ti,wl1807 [ 5.137395] SPI driver wl1271_spi has no spi_device_id for ti,wl1831 [ 5.143787] SPI driver wl1271_spi has no spi_device_id for ti,wl1835 [ 5.150179] SPI driver wl1271_spi has no spi_device_id for ti,wl1837 [ 5.156635] usbcore: registered new interface driver asix [ 5.162089] usbcore: registered new interface driver ax88179_178a [ 5.168239] usbcore: registered new interface driver cdc_ether [ 5.174124] usbcore: registered new interface driver net1080 [ 5.179834] usbcore: registered new interface driver cdc_subset [ 5.185802] usbcore: registered new interface driver zaurus [ 5.191428] usbcore: registered new interface driver cdc_ncm [ 5.197514] usbcore: registered new interface driver uas [ 5.202889] usbcore: registered new interface driver usb-storage [ 5.209070] i2c_dev: i2c /dev entries driver [ 5.214175] usbcore: registered new interface driver uvcvideo [ 5.220225] Bluetooth: HCI UART driver ver 2.3 [ 5.224704] Bluetooth: HCI UART protocol H4 registered [ 5.229878] Bluetooth: HCI UART protocol BCSP registered [ 5.235232] Bluetooth: HCI UART protocol LL registered [ 5.240408] Bluetooth: HCI UART protocol ATH3K registered [ 5.245845] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.252180] Bluetooth: HCI UART protocol Intel registered [ 5.257620] Bluetooth: HCI UART protocol QCA registered [ 5.262905] usbcore: registered new interface driver bcm203x [ 5.268616] usbcore: registered new interface driver bpa10x [ 5.274239] usbcore: registered new interface driver bfusb [ 5.279785] usbcore: registered new interface driver btusb [ 5.285325] usbcore: registered new interface driver ath3k [ 5.291152] sdhci: Secure Digital Host Controller Interface driver [ 5.297378] sdhci: Copyright(c) Pierre Ossman [ 5.301762] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.307625] ledtrig-cpu: registered to indicate activity on CPUs [ 5.313764] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 5.320345] zynqmp_firmware_probe Platform Management API v1.0 [ 5.326221] zynqmp_firmware_probe Trustzone version v1.0 [ 5.332044] xlnx_event_manager xlnx_event_manager: SGI 15 Registered over ATF [ 5.339236] xlnx_event_manager xlnx_event_manager: Xilinx Event Management driver probed [ 5.347560] nvme nvme1: 2/0/0 default/read/poll queues [ 5.386023] securefw securefw: securefw probed [ 5.390767] usbcore: registered new interface driver usbhid [ 5.396376] usbhid: USB HID core driver [ 5.400955] sysmon f1270000.sysmon: Successfully registered Versal Sysmon [ 5.408024] nvme nvme0: 2/0/0 default/read/poll queues [ 5.408069] ARM CCI_500 PMU driver probed [ 5.413630] fpga_manager fpga0: Xilinx Versal FPGA Manager registered [ 5.424605] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 5.432796] Initializing XFRM netlink socket [ 5.437145] NET: Registered PF_INET6 protocol family [ 5.442463] Segment Routing with IPv6 [ 5.446162] In-situ OAM (IOAM) with IPv6 [ 5.450159] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.456335] NET: Registered PF_PACKET protocol family [ 5.461428] NET: Registered PF_KEY protocol family [ 5.466268] can: controller area network core [ 5.470678] NET: Registered PF_CAN protocol family [ 5.475499] can: raw protocol [ 5.478485] can: broadcast manager protocol [ 5.482695] can: netlink gateway - max_hops=1 [ 5.487140] Bluetooth: RFCOMM TTY layer initialized [ 5.492055] Bluetooth: RFCOMM socket layer initialized [ 5.497238] Bluetooth: RFCOMM ver 1.11 [ 5.501010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.506349] Bluetooth: BNEP filters: protocol multicast [ 5.511610] Bluetooth: BNEP socket layer initialized [ 5.516608] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.522561] Bluetooth: HIDP socket layer initialized [ 5.527576] 8021q: 802.1Q VLAN Support v1.8 [ 5.531868] 9pnet: Installing 9P2000 support [ 5.536179] Key type dns_resolver registered [ 5.540549] registered taskstats version 1 [ 5.544667] Loading compiled-in X.509 certificates [ 5.550310] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 5.562434] ff000000.serial: ttyAMA0 at MMIO 0xff000000 (irq = 33, base_baud = 0) is a SBSA [ 5.570867] printk: console [ttyAMA0] enabled [ 5.570867] printk: console [ttyAMA0] enabled [ 5.579590] printk: bootconsole [pl11] disabled [ 5.579590] printk: bootconsole [pl11] disabled [ 5.588910] of-fpga-region fpga: FPGA Region probed [ 5.594298] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success [ 5.601429] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success [ 5.608560] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success [ 5.615693] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success [ 5.622813] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success [ 5.629933] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success [ 5.637057] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success [ 5.644177] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success [ 5.651507] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 5.658788] xilinx_can ff070000.can can0: TDC Offset value not in range [ 5.665716] macb ff0c0000.ethernet: Not enabling partial store and forward [ 5.673812] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x0107010b at 0xff0c0000 irq 25 (6e:e5:7f:ad:df:b4) [ 5.683883] macb ff0d0000.ethernet: Not enabling partial store and forward [ 5.697623] macb ff0d0000.ethernet eth1: Cadence GEM rev 0x0107010b at 0xff0d0000 irq 26 (36:e7:d2:01:3e:7c) [ 5.708194] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.713703] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 5.721432] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238fe65 hci version 0x110 quirks 0x0000000000010810 [ 5.730842] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0xfe200000 [ 5.736904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 5.745181] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.752398] usb usb1: Product: xHCI Host Controller [ 5.757272] usb usb1: Manufacturer: Linux 5.15.19-xilinx-v2022.1 xhci-hcd [ 5.764054] usb usb1: SerialNumber: xhci-hcd.0.auto [ 5.769346] hub 1-0:1.0: USB hub found [ 5.773115] hub 1-0:1.0: 1 port detected [ 5.777163] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.782653] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 5.790306] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 5.796900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 5.805163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.812382] usb usb2: Product: xHCI Host Controller [ 5.817252] usb usb2: Manufacturer: Linux 5.15.19-xilinx-v2022.1 xhci-hcd [ 5.824032] usb usb2: SerialNumber: xhci-hcd.0.auto [ 5.829103] hub 2-0:1.0: USB hub found [ 5.832984] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 5.840763] rtc_zynqmp f12a0000.rtc: registered as rtc0 [ 5.845992] rtc_zynqmp f12a0000.rtc: setting system clock to 2106-02-07T06:28:15 UTC (4294967295) [ 5.855157] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 28 [ 5.861395] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 29 [ 5.867617] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1399998 KHz, changing to: 1199999 KHz [ 5.881186] of_cfs_init [ 5.883641] of_cfs_init: OK [ 5.886505] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.908548] mmc0: SDHCI controller on f1050000.mmc [f1050000.mmc] using ADMA 64-bit [ 5.947985] mmc0: new SDHC card at address 5048 [ 5.952788] mmcblk0: mmc0:5048 SD32G 29.7 GiB [ 5.957483] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.964026] clk: Not disabling unused clocks [ 5.968710] ALSA device list: [ 5.971669] No soundcards found. [ 5.975360] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.983982] cfg80211: failed to load regulatory.db [ 5.988808] mmcblk0: p1 p2 [ 6.023214] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 6.032973] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 6.041318] devtmpfs: mounted [ 6.044807] Freeing unused kernel memory: 2112K [ 6.049410] Run /sbin/init as init process [ 6.717424] random: fast init done [ 7.086590] systemd[1]: systemd 249.7+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 7.116700] systemd[1]: Detected architecture arm64. Welcome to PetaLinux 2022.1_release_S04190222 (honister)! [ 7.174024] systemd[1]: Hostname set to . [ 7.337780] systemd-sysv-generator[217]: SysV service '/etc/init.d/nfscommon' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.364954] systemd-sysv-generator[217]: SysV service '/etc/init.d/dropbear' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.389008] systemd-sysv-generator[217]: SysV service '/etc/init.d/inetd.busybox' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.414218] systemd-sysv-generator[217]: SysV service '/etc/init.d/nfsserver' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.756114] systemd[1]: Queued start job for default target Multi-User System. [ 7.763891] random: systemd: uninitialized urandom read (16 bytes read) [ 7.784915] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 7.804666] random: systemd: uninitialized urandom read (16 bytes read) [ 7.812205] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 7.832619] random: systemd: uninitialized urandom read (16 bytes read) [ 7.840065] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 7.861397] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 7.880756] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 7.904703] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 7.928707] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 7.944627] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 7.964624] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 7.980634] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 8.017971] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 8.040642] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 8.062199] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 8.080754] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 8.100938] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 8.120785] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 8.140824] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 8.160910] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 8.180883] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 8.200785] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 8.220800] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 8.242311] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 8.262327] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 8.286365] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 8.304810] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 8.316415] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 8.338901] systemd[1]: Condition check resulted in Create List of Static Device Nodes being skipped. [ 8.350060] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 8.370803] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 8.390520] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 8.410530] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 8.424664] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.446556] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. [ 8.456098] systemd[1]: Mounting NFSD configuration filesystem... Mounting NFSD configuration filesystem... [ 8.478509] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 8.502630] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables[ 8.510539] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. ... [ 8.530522] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 8.556230] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Huge Pages File System. [ 8.576874] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 8.592908] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 8.613017] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 8.632853] systemd[1]: Mounted Temporary Directory /tmp. [ OK ] Mounted Temporary Directory /tmp. [ 8.653101] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 8.661018] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. [ 8.681229] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 8.688704] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 8.709146] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 8.716687] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 8.736920] systemd[1]: proc-fs-nfsd.mount: Mount process exited, code=exited, status=32/n/a [ 8.745498] systemd[1]: proc-fs-nfsd.mount: Failed with result 'exit-code'. [ 8.753529] systemd[1]: Failed to mount NFSD configuration filesystem. [FAILED] Failed to mount NFSD configuration filesystem. See 'systemctl status proc-fs-nfsd.mount' for details. [ 8.788631] systemd[1]: Dependency failed for NFS Mount Daemon. [DEPEND] Dependency failed for NFS Mount Daemon. [ 8.808586] systemd[1]: Dependency failed for NFS server and services. [DEPEND] Dependency failed for NFS server and services. [ 8.832578] systemd[1]: nfs-server.service: Job nfs-server.service/start failed with result 'dependency'. [ 8.842171] systemd[1]: nfs-mountd.service: Job nfs-mountd.service/start failed with result 'dependency'. [ 8.852966] systemd[1]: Finished Remount Root and Kernel File Systems. [ OK ] Finished Remount Root and Kernel File Systems. [ 8.873747] systemd[1]: Finished Apply Kernel Variables. [ OK ] Finished Apply Kernel Variables. [ 8.894434] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.904729] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... [ 8.930055] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.938665] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.948249] systemd[1]: Condition check resulted in Create System Users being skipped. [ 8.958216] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 8.982121] systemd[1]: Mounted Kernel Configuration File System. [ OK ] Mounted Kernel Configuration File System. [ 9.018965] systemd[1]: Finished Create Static Device Nodes in /dev. [ OK ] Finished Create Static Device Nodes in /dev. [ 9.044840] systemd[1]: Reached target Preparation for Local File Systems. [ OK ] Reached target Preparation for Local File Systems. [ 9.075886] systemd[1]: Mounting /var/volatile... Mounting /var/volatile... [ 9.094973] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm. [ 9.117070] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 9.129998] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 9.140988] systemd[1]: Starting Journal Service... Starting Journal Service... [ 9.155368] systemd[1]: Starting Rule-based Manager for Device Events and Files... Starting Rule-based Manage…for Device Events and Files... [ 9.187341] systemd[1]: Finished Coldplug All udev Devices. [ OK ] Finished Coldplug All udev Devices. [ 9.209018] systemd[1]: Mounted /var/volatile. [ OK ] Mounted /var/volatile. [ 9.232997] systemd[1]: Condition check resulted in Bind mount volatile /var/cache being skipped. [ 9.248671] systemd[1]: Condition check resulted in Bind mount volatile /var/lib being skipped. [ 9.272910] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 9.292688] systemd[1]: Condition check resulted in Bind mount volatile /var/spool being skipped. [ 9.340153] systemd[1]: Condition check resulted in Bind mount volatile /srv being skipped. [ 9.348803] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 9.372831] systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped. [ 9.389443] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Rule-based Manager for Device Events and Files. Starting Flush Journal to Persistent Storage... Starting Network Configuration... [ 9.467994] systemd-journald[244]: Received client request to flush runtime journal. [ OK ] Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ 9.769231] zocl: loading out-of-tree module taints kernel. [ 9.775971] [drm] Probing for xlnx,zocl-versal [ 9.780462] zocl-drm axi:zyxclmm_drm: IRQ index 0 not found [ 9.786079] [drm] FPGA programming device versal_fpga founded. [ 9.853627] [drm] PR[0] Isolation addr 0x0 [ 9.857138] [drm] Initialized zocl 0.0.0 00000 for axi:zyxclmm_drm on minor 0 [ 10.182253] random: crng init done [ 10.185662] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Reached target Timer Units. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on dropbear.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started Kernel Logging Service. [ OK ] Started System Logging Service. [ OK ] Started D-Bus System Message Bus. Starting LSB: NFS support for both client and server... Starting User Login Management... [ OK ] Finished Load/Save Random Seed. [ OK ] Started Network Configuration. Starting Network Name Resolution... [ 10.707109] macb ff0d0000.ethernet eth1: PHY [ff0c0000.ethernet-ffffffff:02] driver [TI DP83867] (irq=POLL) [ 10.716896] macb ff0d0000.ethernet eth1: configuring for phy/rgmii-id link mode [ 10.755310] pps pps0: new PPS source ptp0 [ 10.764651] macb ff0d0000.ethernet: gem-ptp-timer ptp clock registered. [ 10.782301] macb ff0c0000.ethernet eth0: PHY [ff0c0000.ethernet-ffffffff:01] driver [TI DP83867] (irq=POLL) [ 10.792075] macb ff0c0000.ethernet eth0: configuring for phy/rgmii-id link mode [ 10.856712] pps pps1: new PPS source ptp1 [ 10.861153] macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Permit User Sessions... Starting Target Communication Framework agent... [ OK ] Started LSB: NFS support for both client and server. [ OK ] Started User Login Management. [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. Starting inetd.busybox.service... Starting LSB: Kernel NFS server support... [ OK ] Started Serial Getty on ttyAMA0. [ OK ] Reached target Login Prompts. [ OK ] Started inetd.busybox.service. [FAILED] Failed to start LSB: Kernel NFS server support. See 'systemctl status nfsserver.service' for details. [ OK ] Started Target Communication Framework agent. [ OK ] Reached target Multi-User System. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. [ 12.780956] vfat filesystem being mounted at /run/media/mmcblk0p1 supports timestamps until 2107 (0x10391447e) PetaLinux 2022.1_release_S04190222 vck190-fpgadrv-2022-1 ttyAMA0 vck190-fpgadrv-2022-1 login: